TA32 Fittings for pH / ORP electrodes and conductivity cells.

TA32 Fittings
The TA 32 immersion fittings from IMO are available for standard pH and redox electrodes as well as for conductivity cells with cell constants 0.01, 0.1 and 1.
The field of application is immersion in the basin, in the tank, in the control well, etc. Especially for the sensitive pH and ORP sensors the fitting offers a very good protection against glass breakage. By the special calibration sleeves which are enclosed to each pH electrode this protection is again substantially increased.
The fittings are supplied with 2 clips for wall mounting. A collar bushing for concentric mounting and sealing is also available. Different immersion depths of approx. 200, 400 and 900 millimeters are available. In addition, extension tubes and intermediate pieces are available so that even greater immersion depths can be conveniently realized.
To prevent the surface of the pH membrane from becoming encrusted as the liquid level drops, it is important that the pH electrode is always kept wet. For this purpose, two different wet holding caps and a wet holding cup are included in the delivery program for the TA32 immersion fittings.
The immersion fittings are available in PP and PVDF.
0006.3300 TA32 head with cable gland PG9

 
18,80 EUR
 
plus 19% tax
0006.3319 TA32 Immersion fitting tube 19 cm PP

 
28,00 EUR
 
plus 19% tax
0006.3419 TA32 Immersion fitting tube 19 cm PVDF

 
56,00 EUR
 
plus 19% tax
0006.3339 TA32 Immersion fitting tube 39 cm PP

 
32,00 EUR
 
plus 19% tax
0006.3439 TA32 Immersion fitting tube 39 cm PVDF

 
98,00 EUR
 
plus 19% tax
0006.3389 TA32 Immersion fitting tube 89 cm PP

 
36,00 EUR
 
plus 19% tax
0006.3489 Immersion fitting TA32 tube 89 cm PVDF

 
176,00 EUR
 
plus 19% tax
0006.3350 pH/Rx electrode holder TA 32 PP
Please note, the pH electrode shown is not included in the scope of delivery and must be ordered separately. 
39,20 EUR
 
plus 19% tax
0006.3450 pH/Rx electrode holder TA 32 PVDF
Please note, the pH electrode shown is not included in the scope of delivery and must be ordered separately. 
108,00 EUR
 
plus 19% tax
0006.3340 TA32 connector PP connects 2 pipes
is used to connect 2 tubes TA32. 
18,20 EUR
 
plus 19% tax
0006.3440 TA32 connector PVDF, connects 2 pipes.
is used to connect 2 tubes TA32. 
38,00 EUR
 
plus 19% tax
0022.4490 PVC-U fitting, 2 1/4" with 2-fold gluing sleeve

 
8,80 EUR
 
plus 19% tax
0022.4500 TA40 adapter ring d=63
for screw connection 2 3/4 "
Outer diameter: 78.4mm
 
26,50 EUR
 
plus 19% tax
0022.4510 PVC-U fitting, 2 3/4" with 2-fold gluing sleeve

 
12,00 EUR
 
plus 19% tax
Show 1 to 18 (from a total of 18 products)