Ampere hour counter AZ 4000
2140.0000 Ampere hour counter AZ 4000
Ampere hour counter AZ 4000

2140.0000 Ampere hour counter AZ 4000

Product No.:
2140.0000
ca. 3-4 days ca. 3-4 days (abroad may vary)
Weight:
1 kg per piece
864,00 EUR

plus 19% tax

Add to wish list
Ask about product
Description
AZ 4000 ampere hour counter
Ah-counter with 6-digit electromechanical Summing counter 
and 6-digit electronic preset counter.
In closed case for installation or local operation.
Connecter to standard shunt 60mV or equivalent signal outputs from electroplating rectifiers.
Pulse output for external control of programmable dosing pumps. For example Gamma / 4 with Pulse Control
The electromechanical totalizer may be reset with a key.

For input voltages lower than 1 mV and higher then 150mV,
LED indicates the range control () that no accurate measurement is obtained.
(Nominal voltage of a standard shunt = 60mV)
For currents up to 12A, the shunt can be built in the device.
      
Specifications:  (changes reserved)
1. mechanical
    Totalizer

2. LED Power
3. LED Range
4. LCD
    Preset counter
Totalizer          electromechanical 
6 digits
(optional electronic LCD)  
Preset counter   LCD 6 digit, electrically resettable
Accuracy    0,1%
Input voltage

for the total current through isolating modules
(Other voltages on request) 		60mV (1...150mV)  
 

10V
     
Pulse output for external control of programmable dosing pumps for example
Gamma / 4 with Pulse Control

 		 Opto coupler
10mA Uce<0,7V 
Uce max 35V

Relais output
100V 1A (optional) 
Ratio
Total cycle counter to output pulses
 		 1:1
   
Output preset counter
to switch of  the rectifier    
relais contact
floating
230V AC / 0,5A
30V  DC 2A   
Suitable for connection of the membrane dosing pump Gamma / 4 with pulse control for automatic dispensing of bath additives.
    
Adjustable measuring ranges
Ah-counter ......300 A    (2 decimal points)
..:.3000 A    (1 decimal point)
..10000 A    (0 decimal point)
Amin-counter .......... 6 A    (2 decimal points)
.........60 A    (1 decimal point)
.......400 A    (0 decimal point)
Asec. / Metal weight
             counter		 on request
    
Adjustment to the shunt data can be changed by the customer too.
    
Operating voltage   230 V 50/60 Hz    -20% / +10%  
Power consumption 4 VA
Ambient temperature 0...50°C
Case Panel mounting case to
DIN43700 
Material flame retardant Noryl
Front size W x H 144 x 72 mm
Front panel cut W x H 137 x 66 mm
Depth 180 mm
Connectors Plug-in terminal
Weight approx. 1050g
Climate resistance rel. Humidity =< 75% 
without condensation  
Electrical safety   to EN 61 010
Air and creepage distances for
Overvoltage category II
Pollution degree 2
Class 1
Protection class

with transparent door		 to EN 60 529
front side IP44
                  IP54 
Electromagnetic tolerability to NAMUR recommendation
NE21, EN 50 081 Part 1
EN 50 082 part 2
 
Customer reviews

Unfortunately there are no review yet. Be the first who rate this product.

Your opinion