2000.0025 PM2000 measuring device for pH/ ORP/ °C/ e.c.

Product No.:: 2000.0025
Stock:: pieces
Weight:: 1.9 kg per piece

554,00 EUR

plus 19% tax

Description

Description

PM2000 for the analysis of pH value, ORP, conductivity and temperature,

all in one.

Device Description

1	Rugged, anodized aluminum housing IP63
2	LCD-display, 8 digits x 14 segments
3	On key
4	Measuring type pH / mV / °C / µS/cm / mS/cm
5	Automatic calibration for pH by CAL
6	Off - key
HOLD	Hold display and backlight
SETUP	An easy to use menu structure
15	Automatic sensor detection

7	Conductivity cell Material: ABS, temporary until 100 ° C to use Dimensions: 32 x 18 x 165mm W x D x L
8	Low polarizing graphite
9	Pt 100 temperature sensor

13	pH of-ORP measuring preamplifier
14	Sensor spiral cable
10	pH electrode pH62 Inlab routine or redox electrode if required, please order separately.
12	Electrode plug AS7
11	Pt1000 temperature sensor, Shaft: 1.4571

The unit is delivered complete in case.
For the measurement of surface water and drinking water, we recommend to order the pH electrode INLAB routine.

This portable analyzer with battery supply is appropriate for each application. Whether in the lab, in production, in wastewater treatment or in routine measurements in the field. Just in any place where accurate measurements are required.

Specifications: (changes reserved)

Display LCD	7mm 8 digit x 14 segments
pH measurement	0.00 to 14.00 pH automatic temperature compensation Display accuracy ± 0.01 pH
pH- input resistance	>10¹² Ohm
pH- input current	=< 1 pA

pH- electrode	pH 62 0-12 pH, 0 - 60 °C Dimensions 12mm x L=125mm Electrode Plug AS7 All-round standard pH electrode with plastic shaft

Temperature measurement measuring preamplifier	Range -50.0 °C. .. +150,0 °C Resolution 0.1 °C Accuracy 1°C Sensor Pt 1000 class B Probe shaft 1.4571

mV-ORP-measurement	-1000 mV ... +1000 mV Resolution 1mV. Calibration of zero point with calibrating solution

e.conductivity measurement S/cm	0...99,99µS / 999,9µS / 9999µS / 99,99mS / >500mS Measuring error ... 200,0 mS: 2% / 8 Digit ... 500,0 mS: 4% / 5 Digit Reference temperature 20 °C / 25 °C Measuring frequency 16 Hz ... 110 kHz Temperature compensation 0 .. 3.9% / °C default 2.2% / °C natural water

Temperature measurement e.c. cell	0 °C to 100 °C Resolution 0.1 °C Accuracy 1°C Sensor Pt 1000 class B built into the e.c.cell

Batteries	3x 1,5V Lithium approx. 150 hours of operation LOBAT indicator Automatic shutdown after 15 minutes
Ambient temperature	0...50°C
Housing	Aluminium anodized IP63
Weight	550g (unit with sensors)
Dimensions H x W x D	130 x 82 x 31mm
Warranty	1 year, wear items such as i.e. pH electrodes excluded.