LMA-MODBUS digital conductivity measurement
The LMA-MODBUS 0022.0300.01 combines a conductive measuring cell with integrated LF-TR-MOD electronics. Conductivity, temperature, cell resistance, status and measuring range are transmitted over RS-485 using Modbus RTU. Five internal measuring ranges switch automatically.
| Standard version |
Cell constant 0.1 cm-1; PP measuring-cell housing |
| Other versions |
Cell constants 0.01 and 1 and PVDF available on request; measuring range depends on the cell |
| Power supply |
12/24 V DC ±10 %; current consumption <50 mA |
| Interface |
RS-485, 2-wire, Modbus RTU; 4-pin connector |
| Factory settings |
9600, 19200, 38400, 57600 or 115200 baud, 8N1, device address 10 |
| Baud rates |
9600, 19200, 38400, 57600 and 115200 bit/s |
| Software versions |
LF-TR-MOD firmware 1.12; PC monitor 1.16 |
Configuration and IO-Link
Windows Monitor 1.16 provides device scanning, live display, configuration, calibration and CSV logging. IO-Link requires an external, preconfigured Banner S15C-MGN-KQ converter, which is not included with the standard version of this article.
For high-pressure applications: HP LMA 0020.0300, rated 200 bar at 100 °C, with Pt1000 and G 3/4″.
Downloads