Immersion assembly TA 32-100 PP for 1 x pH / ORP electrodes with 120mm standard length e.g. pH110 Teflon ring diaphragm.
Easy calibration and cleaning of the electrode is given by unscrewing the protection tube. The immersion fittings are available in lengths of 30, 50 and 100 cm. The materials available are PP and PVDF.
Specifications:(changes reserved)
Material
PP
Operating temperature
max.70°C
Protection class
IP68
Seals O-ring
EPDM
Pipe diameter
32 mm
Total length
1000 mm
TA32 head with PG9 gland
TA32 mounted
To replace the pH electrode, clean the TA32 immersion assembly and open the PG9 screw connection in the head (the pH electrode cable must rotate easily). Then unscrew the tube of the TA32 from the electrode holder. (Rotate)The electrode holder and cable do not rotate. To clean and CALibrate the pH electrode, only unscrew the pH electrode protection tube.
The immersion fitting is delivered with 2 mounting brackets for the side container mounting.