ISO transducer for conductivity
in DIN rail case with automatic temperature compensation and
electrical isolation.
The instrument converts the conductivity of the measured solution
into a low- impedance output signal of 0(4)..20mA or 0..5/10V.
Measuring range: 0... 1S/cm with e.c. measuring cell LM, LMN
Output: 4... 20mA / 0... 20mA / 0... 5V/10V
Supply voltage: 12VDC / 24VDC
CC means cell constant
The specified measuring ranges refer to CC1 and are
internal after opening the device by 3x jumper switchable.
The adjustment was carried out with 5m cable 4 x 0.34mm².
The data refer to µS/ mS/ S/cm.
Order no. 0022.0410.1 24VDC 4... 20mA 200µS/ 2mS/ 20mS
Order no. 0022.0410.2 24VDC 0... 20mA 200µS/ 2mS/ 20mS
Order no. 0022.0410.3 12VDC 4... 20mA 200µS/ 2mS/ 20mS
Order no. 0022.0410.4 12VDC 0... 20mA 200µS/ 2mS/ 20mS
Order no. 0022.0410.5 24VDC 0... 5V 200µS/ 2mS/ 20mS
Order no. 0022.0410.6 24VDC 0... 10V 200µS/ 2mS/ 20mS
Order no. 0022.0410.7 12VDC 0... 5V 200µS/ 2mS/ 20mS
Order no. 0022.0410.8 12VDC 0... 10V 200µS/ 2mS/ 20mS
For the following devices the measuring range is fixed to
200mS/cm for CC1, or 1S/cm for CC5.
Order no. 0022.0410.9 24VDC 4... 20mA
Order no. 0022.0410.10 24VDC 0... 20mA
Order no. 0022.0410.11 12VDC 4... 20mA
Order no. 0022.0410.12 12VDC 0... 20mA
Order no. 0022.0410.13 24VDC 0... 5V
Order no. 0022.0410.14 24VDC 0... 10V
Order no. 0022.0410.15 12VDC 0... 5V
Order no. 0022.0410.16 12VDC 0... 10V